Boom Drilling Machine - ABMH66-B
ABMH66-B at a Glance:
For drilling knots
Robust and fuctional construction
660 mm projection
120 mm height adjustment of the drilling unit
With hand lever of pneumatic feed
For wall installation or with machine frame
Drill chuck for the use of drill bits with cylindrical shaft
ABMH66-B boom drilling machine has been specially designed for the daily requirements of interior work companies. It has the robust and well thought-out design typical of Ayen and is beyond this easy to operate.
ABMH66-B has a single-spindle drill head (motor spindle with spocket drill chuck, 3-16 mm) and a standard dust extraction hood, which also serves as the workpiece clamping device. It also has a large projection of 660 mm and can be equipped with all kinds of drill bits with cylindrical shaft.
The machine can either be mounted directly on the wall of your workshop or on a stable machine frame. In addition to the standard hand lever operation, the drilling stroke can also be optionally equipped with a pneumatic drill feed cylinder (ABMP66-B). The height of the drilling unit can be adjusted over a 120 mm range using a handwheel. This makes the ABMH66-B the ideal boom drilling machine for companies that want to combine high requirements with easy handling and low costs.
ABMH66-B boom drilling machine is available in the following versions:
ABMH66-B / 1.400 with 1,400 rpm.
ABMH66-B / 2.800 with 2,800 rpm.
ABMH66-B / Freq.: Machine with frequency inverter for infinitely variable speeds from 1,200 to 2,800 rpm; speed adjustment via potentiometer.
Technical data
Tool drive power
1.5
kW
Tool drive rotation speed
1400 | 2800 | Freq.
rpm
Maximum workpiece thickness
150
mm
Projection to drill
660
mm
Height adjustment via hand wheel
120
mm
Drilling stroke
70
mm
Working table dimensions (width x depth)
400 | 600 x 1000
mm
Working height
855
mm
Necessary extraction capacity
480
m³/h
Extraction port diameter
86
mm
Weight of machine
55
kg
Weight of frame
120
kg
Add-on options for ABMH66-B
Illustrations may differ from the original
Machine frame
If the boom machine is not to be attached to the wall, we will be happy to supply a suitable machine frame:
with/without working table
with/without fence system (1 x depth-adjustable, 2 x side-adjustable)
Target light
Our cross laser is used to optimally target wood defects.
Casters
To save space, you can add casters to your ABMH66-B machine frame. This allows you to push the machine to the operation site.